Josephson Engineering C700A
Series Seven microphones provide unprecedented flexibility, as the directional pattern of the mic can be adjusted in use, during or after recording. The Josephson C700 microphones include omni/pressure and figure-8/gradient capsules, each with a discrete output. The signals can be recorded on separate tracks, so the pattern can be selected in mixdown. Pattern control is only one advantage of this technique. Applying different equalization or dynamic control to the capsule signals makes entirely different mic characteristics - for instance the warmth of a gradient mic used close up for vocals might be combined with the transparency of a pressure mic in the highs, by rolling off the high frequencies in the gradient signal and the lows in the pressure signal before they are combined.
The Josephson C700A includes two capsules in one housing, a 16mm omni/pressure element similar to the KA11 capsule in the Series Six, and a 26mm figure- 8/gradient capsule. Mixing the two outputs equally produces a cardioid pattern, using other ratios makes any desired pattern from omni to figure- 8.
Completely neutral electronics, using the same cascode FET input, class-A active balanced output circuit found in the Series Six, are provided for each signal. Any directional pattern from omni to figure-8 may be selected by controlling the ratio of pressure to gradient signals.
The capsule assembly in the Series Seven is internally shock mounted, so that the mic may be attached directly to a stand through its yoke mount without any external accessories.
- LENGTH 328 mm
- DIAMETER 63 mm
- TUBE OR SOLID STATE Solid State
- TRANSDUCER TYPE Condenser
- POLAR PATTERN Omni-Directional
- PHANTOM REQUIRED Yes
- FREQUENCY RANGE 20 Hz - 20 kHz ±2 dB
- SENSITIVITY -41 dBV/Pa (9 mV/Pa)